SynQor® Releases an Advanced Military-Grade DC Output, Shallow Rack Power Conditioner (MPC-1250) for MIL-STD-1275 Applications
BOXBOROUGH, Mass., March 30, 2022 (Newswire.com) - SynQor, Inc., a leading supplier of power conversion solutions, announces a new "Constant Current Overload Protection" output model for the DC output Shallow Rack Military Field-Grade Power Conditioner. The feature allows the output to be directly connected to the terminals of a lead-acid battery used with a 28V vehicle power system as defined by MIL-STD-1275D. This allows vehicle electronics to be powered from an external AC or external DC source. The output voltage is user selectable between 22 and 33 Vdc to match the nominal voltage of the vehicle's lead-acid battery. The unit automatically detects if the vehicle lead-acid battery has been deep-discharged, and will enter a Constant Current Constant Voltage (CCCV) charge sequence. The current limit is fixed at 47 A, making it capable of charging high amp-hour batteries typically used in military vehicles. The "Top Off Voltage" and "Top Off Time" can be adjusted to match the CCCV profile of the vehicle battery. When the output is disabled, the MPC-1250 will draw less than 2 uA from the vehicle battery to prevent self-discharge. The output is protected from all spikes and surges defined by MIL-STD-1275D. The output is also reverse polarity protected to -60 V. The unit is able to operate in current limit indefinitely. While the current demand exceeds 47 A, the unit behaves as a constant current source. The current limit feature can be used to charge near-infinite capacitive loads.
The MPC is packaged into a 17.00" W x 14.80" D x 1.73" H, 22 lbs. enclosure designed for the harshest environments. The MPC-1250 is a true on-line double conversion, isolated, fully regulated 1250 W DC output power supply. The unit has a universal, single-phase AC input that accepts input voltages between 80 Vac - 265 Vac with an optional wide frequency range (47-800 Hz). The unit can also be powered from an alternate DC input source between (22 Vdc - 33 Vdc). Additional built-in features include soft start, fault recognition and recovery conditions for overload, input under voltage and over voltage and temperature abnormalities, all of which are noteworthy.
Multiple units can be paralleled to deliver a higher power, fully regulated DC output voltage. An inter-unit communication link allows multiple units to behave as a single system while delivering higher combined power or providing a fully N+M redundant system.
The MPC system includes features that allow remote tracking of the unit's systems via the industry-standard SNMP or an intuitive GUI-driven web interface. The users can track various operational parameters like the output and input parameters, temperature, fan speed and much more.
The Shallow Rack MPCs have been designed to meet several of the most demanding electrical military standards, including MIL-STD-1275D, MIL-STD-704F, MIL-STD-1399-300B and MIL-STD-461F. The MPC has electrically superior characteristics to many power supplies of its kind and has been designed to comply with the harshest environmental conditions as required by MIL-STD-810G while remaining compact and ultra-light.
Features
- 1250 W isolated full power DC output (28 Vdc)
- Universal AC input: 80-265 VAC; 47-65 Hz or 47-800 Hz
- Output Voltage range 22-33 Vdc
- Current Limit 0-45 A
- Wide temperature range -40 °C to +70 °C
- Built-in Load Sharing and Redundant (N+M) capabilities
- 1U High Rack-Mount unit (17.00" W x 14.80" D x 1.73" H)
- Real-time monitoring via SNMP or Web Interface
- Low Weight 22 lbs.
Specification Compliance
- MIL-STD-461F
- MIL-STD-704F
- MIL-STD-810G
- MIL-STD-1275D
- MIL-STD-1399-300B
Please download the MPC-1250 datasheet and Operator's Guide. Find I/O cables, power cables and replaceable fans for the MPC-1250. For more information on this or for additional power application assistance please explore more at www.synqor.com or contact your local SynQor representative.
Source: SynQor, Inc.
